WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Model Studio instructions: models, color, photos, and measured parts

Practical 3D printing help, settings, projects, and advice from fellow makers.

Announcements · PINNED

P0k3sm0t
MODEL STUDIO: CHOOSE A TOOL, REVIEW, THEN PREPARE TO PRINT Model Studio contains eleven tools for building, coloring, repairing and converting models. Some use AI for planning or image interpretation; measured builders create geometry from their numerical controls. Use the website Menu to open Model Studio in a browser or the Android app. Under New model project, select a tool, then use Instructions for its full manual. The instructions open in a new tab without discarding the current form. Model Studio is under active development. Results can vary and may fail to produce a usable model at all. Inspect the geometry and sliced toolpaths before printing. CHOOSE THE RIGHT TOOL • CAD Designer: describe a mechanical part, review the AI feature plan and measurements, update the actual 3D preview, confirm it, then generate a checked STL. It supports bounded mechanical features; it is not arbitrary text-to-anything CAD. • Measured part: enter dimensions for simple shapes, spacers, plates or the two-piece interlocking stand. Notes do not replace the measured fields. • Mesh to CAD: upload a mesh for checked STEP and FreeCAD solid exports. Optional small-defect repair, round-surface recognition and bounded freeform fitting can help. Original sketches and complete feature history are not recovered; some CAD faces can remain faceted. • Photo to 3D: reconstruct one reference image into STL. The same tool provides optional reference editing, neutral-gray preparation, mirror repair and quarter-based sizing. Hidden geometry and depth are inferred, not measured. Approve edited images and repair previews before reconstruction. • Color model: color existing STL/3MF/OBJ geometry using a description and optional feature controls. Review all sides and unresolved placement. Download the colored 3MF to retain printable colors; STL contains geometry only. This does not add missing accessories or turn a single-tool printer into an automatic multicolor printer. • Enclosure: build a measured electronics case with reviewed mounting points, ports, vents and a lid. The drawing reader suggests values from full dimension drawings; verify them. Port templates and Follow board position help layout but do not establish actual plug clearance. • Spur Gear Builder: create one external gear or internal ring with straight, helical or herringbone teeth. External gears have optional bores, splines and hubs; internal rings have adjustable rim thickness. Selecting a mating tooth count does not generate another gear. Internal angled mates need the same hand; two external parallel-shaft angled gears need opposite hands. • Gearworks: build a complete matching ring-and-pinion, bevel, worm, helical, herringbone or rack set. Inspect Assembled and Print layout; download the combined layout OR individual ZIP components without duplicating them on a plate. • Sign & keychain: choose a base shape and size, words/font, symbols, artwork, holes, printable QR cells and tag/magnet/bolt pockets. Open pockets and enclosed pockets have different insertion plans. STL does not program NFC tags or add print pauses; schedule insertion pauses in the slicer and test the finished QR code and fit. • MeshRight: inspect, repair, orient and edit meshes in a private hosted workspace. Use Undo, download a .meshright project, or export the result. Its workspace and recovery are temporary and separate from the Saved projects list. Studio transfers send the selected edited model as STL. • STL Splitter: divide an oversized STL using your build volume, seams and optional connectors. Cutting runs locally on your device. Download the complete ZIP before leaving; Part to send transfers only one selected piece or dowel-stock file. Refreshing the page loses this unsaved workspace. BUILD AND REVIEW 1. Select the tool and use its actual file/measurement fields. Check source units, dimensions, holes, thickness and printer fit. Each tool has its own input formats and complexity limits; a 90 MB slicer upload allowance does not remove Mesh to CAD's conversion triangle limit or sign artwork limits. 2. Update the tool's preview after changing the design. Where a review checkbox is required, inspect and confirm the new preview. A drawing suggestion, AI plan or valid mesh is not proof of accurate hardware dimensions. 3. Generate or convert once and follow the build table. Avoid submitting duplicate jobs while work is queued. Use the displayed error to correct invalid dimensions, missing surfaces or detail limits instead of retrying unchanged inputs. 4. Review every side of the finished geometry, dimensions, holes, separate bodies and warnings. Watertightness and printability scores are software checks; they do not establish strength, likeness, fit or a successful print. QUEUES AND CONNECTION STATUS The Model worker card shows availability; the Model queue card shows waiting/running work. Lightweight CPU model jobs use a separate lane from GPU photo reconstruction, reference editing and color jobs, so a GPU job does not need to block a measured builder. Enclosure drawing reading and CAD planning have their own bounded analysis stages. MeshRight workspaces and browser-local STL Splitter cutting are separate workflows. Signed-in jobs go ahead of waiting guests; after ten signed-in jobs the oldest waiting guest gets a turn. Running work finishes first. Queue positions and time estimates can change. Allowance and storage limits apply; read the current message for your account. Failed or cancelled generation jobs release their reserved allowance. Select Cancel when available, or Retry after a failure/cancellation. Saved worker projects can be reopened without keeping the original tab open. Keep the page available for analysis results or download temporary-workspace projects before leaving. The page pauses background status checks while hidden and refreshes when you return. If a connection notice appears, use Reconnect and check the existing project before submitting again. An Offline worker or a full workspace pool needs availability to recover; a browser refresh does not make a queued job finish sooner. SAVED WORK AND PREVIEW CONTROLS Saved projects can be searched by name or tool and filtered by status. Refresh projects updates the list without discarding the setup form. Open a completed project and use its Edit design action to load supported saved fields into a new project; earlier versions remain available. Clear / start over resets the current workspace while keeping the selected tool; it does not delete finished saved projects. MeshRight projects and STL Splitter exports use their own save/download controls. In a completed model, Fit model, Top, Front and Bottom help inspect every side. Drag to rotate, scroll/pinch to zoom, and use Shift-drag or two fingers to pan. Pan view changes a one-finger drag to panning. Color, Solid and Wireframe inspect a color model; if the color preview cannot load, the STL remains a geometry-only fallback. Preview cameras and display modes do not change exported coordinates. DOWNLOAD AND SEND TO A STUDIO Use Download printable STL for geometry, or a tool-specific 3MF, STEP, FreeCAD, project or ZIP download when its information is needed. Keep the original input and an editable project. Sample-card Exact settings/recipe files are references for manual entry unless the tool explicitly provides project import. Published sample kits retain the settings tested for that specific example; they are not universal printer profiles. Send to Slicer Studio prepares the chosen geometry and shows transfer progress. Inspect the loaded object list, actual printer/nozzle, build plate, every filament/tool and process settings. Slice and review real toolpaths before downloading G-code. Add support fins opens Support Fin Studio: Orient, Supports to generate fins, then Review and export/transfer. It is not a separate Add fins step in that editor. Support-fin transfers apply the matching layer height and turn adaptive/automatic slicer supports off; inspect any remaining unsupported areas. STL cannot preserve colors or print-pause commands. Keep a colored 3MF for color assignments; map them to your printer's actual tools. For enclosed inserts, note the roof-start Z, find the corresponding sliced layer, add a supported pause before that layer and re-slice. A Z height in millimeters is not a layer number. On a community page, Prepare before downloading transfers all eligible printable parts. An action beside one file transfers only that file. STL Splitter's Part to send similarly sends only the selected piece. Do not add a combined layout and its duplicate individual parts together. The website tools prepare files. The Android app can upload verified G-code to a compatible saved local printer and offer Start print as a separate confirmed action. No Model Studio generation, download or transfer by itself starts a printer. SHARING, PRIVACY AND RETENTION A downloadable result may remain private for review. Eligible output may qualify for automatic CC0 library sharing; tools and results requiring review stay private until the supported review-sharing step. Share reviewed model requires sign-in, rights confirmation and CC0 acceptance. The server rechecks the original output; invalid geometry cannot bypass these checks. Sharing does not publish private source photographs, masks or spec sheets, but the STL reveals its geometry and any encoded QR content. Known generated output and in-site derivatives stay free-only under the site's existing provenance rules. Creator-review CC0 sharing is separate from marketplace seller verification and paid-model licenses. Read Community Models and the marketplace policy before sharing or buying digital files. Eligible inactive private reference images, edited images, masks and working files follow seven-day cleanup; active/referenced work is protected. Finished outputs, shared files and retained purchased releases have their own retention rules. Download your own backups. MeshRight closes idle workspaces after 20 minutes, with recent same-browser recovery for up to 24 hours. STL Splitter keeps its unsaved work in the page's memory; download before closing or refreshing. See the Retention page for the complete policy. RELATED INSTRUCTIONS AND HELP Open Model Studio · Slicer Studio instructions · Support Fin Studio instructions · Community Models instructions · Android app setup · Retention and deletion · Marketplace policy For a problem, use the issue-report questionnaire. Include the tool, browser/app version, file type and size, steps, selected settings, failed stage, exact error, expected result and actual result. Attach a small shareable example and screenshot when helpful. Never post API keys, passwords, private/customer files or confidential model data.
Sign in to reply

Edit post