SMARTER PRINT PREPARATION
Breakaway Supports — Support Fin Studio
Orient STL, 3MF or STEP models and add removable support fins in your browser. Check contact points, then export the supported model or send it to Slicer Studio.
Queue and usage limits. Guests and signed-in members share the same queue, with no priority by account type. Guests can send up to 120 generation requests per hour per session. Members can send up to 120 per hour per account. Each can have up to 2 jobs queued or running. The server can run 2 jobs at once and hold up to 16 queued or running jobs total.
- Import a model. Open an STL, 3MF or STEP file.
- Orient the part. Choose how it will sit on the build plate and inspect its overhangs.
- Add fins. Open Supports to generate fins, adjust their settings, and check where they touch the part.
- Review and export. Check build-volume fit and layer height, then download the supported model or send it to Slicer Studio.
- 1Import a modelOpen an STL, 3MF, or STEP file
- 2Orient the partChoose its strongest print position
- 3Create finsReview and tune removable supports
- 4ExportSlice on the server in Slicer Studio
Prepare a model for cleaner printing
Orient your part, review overhangs, and add removable support fins.
STL, 3MF, STEP / STP · drag a file onto the workspace
Your model stays in your workspace until support generation or a transfer needs the server.
How it works & engine credits
Editing stays in this browser; support generation runs privately on the server. Choosing “Send to Slicer Studio” privately uploads the finished 3MF to your temporary or signed-in slicing workspace. Choose whether to apply its support settings or keep your current setup.
Powered by the open-source Support Fins engine by Matthew Trahan under the MIT License.
Support the original Support Fins creator, Matthew Trahan, through his Ko-fi page ☕. Contributions go to him, not Homebrew Printing.
Drag to rotate · pinch to zoom · two fingers to pan
This file has several objects
Pick the one to add fins to. Check more than one to merge them into a single part.