WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Community Models instructions: sharing, downloads, and marketplace

Practical 3D printing help, settings, projects, and advice from fellow makers.

Announcements · PINNED

P0k3sm0t
COMMUNITY MODELS, SHARING, AND DIGITAL MARKETPLACE MARKETPLACE STATUS Live marketplace sales have been enabled following configuration and launch checks. Current availability depends on Print Desk sales controls, payment/tax readiness, and seller approval; the shop can pause sales. Real Stripe sandbox tests have verified seller onboarding, successful and declined payments, protected downloads, duplicate notifications, seller-approved refunds, seller transfers and reversals, and dispute holds. Sandbox testing uses simulated money and does not verify live tax obligations or actual bank settlement. Built controls, accepted seller terms, or a sandbox test do not mean live sales are open. No public sandbox sales are allowed. The public marketplace policy is the complete buyer/seller agreement; this guide explains controls and does not replace it. BROWSE AND DOWNLOAD Community Models has Community uploads, Generated Model Library, and Test Models library selections, with Models / Print profiles for models and category/sort filters. The print-profile filter finds shared parts that have prepared 3MF projects; it is not a machine-preset library. Changing library or model/profile selection applies it immediately. Enter a search and press Enter or use the magnifying-glass button. Free and paid / Free only / Paid only controls filter eligible visible listings; unavailable paid listings are not publicly exposed while sales are closed. Open a shared model page and read its license, included files, printing notes, and source credit. Download ZIP is a visible download control; individual downloads are available separately. A ZIP contains the accessible release files, not a promise of every photo or later contributor's project. The visible Print files panel beside the model downloads contains contributed 3MF print profiles. Select All or a printer to filter the projects. Cards identify the contributor, Designer when they created the part, printer, nozzle, layer height, material, available filament colors, plates, and entered print time. A Make shared label means the contributor posted a make; it is not a platform certification. Only upload or redistribute files you own or are licensed to share. Credit alone is not permission. Free Creative Commons releases keep their granted rights and cannot be converted into restrictive paid releases. Imported Community Library and AI-created models remain free. The server recognizes known AI output even when it is downloaded and reuploaded, and carries its origin through in-site mesh preparation. It rejects paid listing creation, edits, attachments, and checkout for that output. Reuploading does not grant selling rights. MY WORKSHOP AND SHARING Sign in to manage shared models, contributed model print profiles, and your maker identity in My Workshop. The Print profiles tab lists your prepared 3MF projects with links to their parts. Share makes, photos, and useful settings without exposing printer access codes, private addresses, or credentials. A contributed OrcaSlicer/Bambu Studio 3MF contains model geometry and project settings; review both before contributing it. To contribute, open the part and choose Add print profile. Select the complete 3MF, enter a profile name, and confirm permission to share it under that part’s license. You can use the embedded printer name or supply your own. Optional card details and print notes describe the project without changing its file. A make photo is optional. Projects must contain both model geometry and OrcaSlicer/Bambu Studio project settings; a printer-preset JSON/ZIP is not a model print profile. Downloads retain the original geometry, settings, colors, painting and layer changes. Check printer compatibility and remove private printer addresses, access codes and API keys before uploading. Original 3MF projects are limited to 50 MB, 1,200 entries and 150 MB expanded. Saved private machine presets remain a Slicer Studio account feature, separate from model print files. Signed-in Messages and Notifications remain in the shared header. My orders is in the account-avatar menu and covers physical printing orders. Digital files purchased from sellers belong in My Purchases instead. Physical print quotes and digital-model licenses/payments are separate workflows. MODEL STUDIO MODELS A successful generation can remain private for quality review. Single-photo models can qualify for automatic CC0 sharing. For eligible private models, Share reviewed model requires creator review, rights confirmation, and CC0 acceptance; invalid geometry cannot bypass the checks. Mirror repairs and measured enclosures initially need review. Reference photos, edited references, masks, and spec sheets are not publicly shared with the STL. Read the Model Studio guide for exact controls and limitations. SELLER SETUP WHEN PAYMENTS ARE CONFIGURED Open My Workshop > Seller setup & sales. Read and explicitly accept the current marketplace policy, commission/processing schedule, age/US eligibility, and ownership assurances. Accepting terms permits preparation of draft listings; it does not approve a seller for purchases or payouts. Complete Stripe-hosted verification and bank setup using your own accurate information. Returning to the site is not verification proof: the server checks Stripe capabilities and payout status. Homebrew owner approval is separate and is required by default before sales or transfers. Test-mode approval does not approve a live seller. Required business-verification steps must be completed by the actual seller. When eligible, choose Paid digital model in the listing editor, set the USD price, choose Personal use or Commercial physical prints, and provide accurate photos/renders and file descriptions. Paid previews do not deliver unrestricted model geometry. Previously shared free releases cannot be relabeled to take away existing rights. Initial marketplace scope is US sellers/buyers, USD, one listing per checkout. The current starting commission is 10% of model price before tax, with actual payment-processing fees deducted separately from seller proceeds. Print Desk can change the schedule. A change requires new seller acceptance for future checkouts; completed purchases keep their captured license and fees. Read the full policy for licenses, fees, chargebacks, refunds, account closure, and retention. NEW-SELLER LIMITS AND PAYMENT REVIEW Starting controls use a 30-day new-seller period after owner approval in the relevant mode, a 14-day minimum earnings hold, a $50 per-sale cap, and rolling 24-hour caps of $200 or 10 sales. Recent unpaid checkouts reserve capacity; refunded paid sales can still count. The owner can adjust these controls in Print Desk, so read the current displayed policy and seller dashboard rather than relying on this guide's starting values. Each purchase keeps the hold captured at checkout. Established sellers use the configured standard hold, initially at least seven days, subject to provider availability and other checks. Elevated/highest Stripe risk, risk scores at or above the configured threshold (initially 65) when supplied, failed card checks, open Stripe reviews, unavailable risk assessments, and late payments over limits can hold a payment for owner review. Downloads and seller transfers remain locked while held. A checkout return, payment screenshot, success notification, duplicate notification, or won dispute does not clear a separate risk hold. Do not pay again for the same model while a payment requires review; open My Purchases or contact support. These controls reduce risk but cannot eliminate stolen-card payments, refunds, chargebacks, seller losses, or failure to recover transferred money. Stripe verification and a waiting period do not guarantee legitimacy or recovery. Homebrew's chosen platform-charge flow still carries platform balance responsibility; review Stripe's actual agreement and displayed fees before activation. BUYING WHEN LIVE SALES OPEN Read the model's license and included release before Buy model. Explicitly accept the policy/license and eligibility confirmations, then review the final tax/total in Stripe. Server-confirmed payment and any required security review are needed for access. Personal use permits personal printing; Commercial physical prints permits licensed physical sales. Neither permits general digital redistribution. My Purchases supplies retained release files, ZIP downloads, receipts, accepted-policy information, and refund-request controls. Later seller edits, additional files, or a different license are not automatically included in an earlier purchase. Retained purchased releases remain separate from current listings and working uploads. Refunds or applicable disputes can restrict access. Missing, corrupt, duplicate, or materially misdescribed purchases can be reported through the refund workflow; requesting a refund does not immediately issue one. Once bought and downloaded, a refund is not guaranteed. Ordinary requests need a seller approval or refusal with a reason in Seller setup & sales; approval authorizes Homebrew to process the refund and deduct refunded revenue and applicable costs from seller earnings. Buyers can appeal refusals or unanswered requests to support. Homebrew retains documented exceptions for legal rights, fraud, duplicate charges, and unresolved file/delivery defects. A recorded delivery does not prove a complete download or a defect-free file. PRINT DESK: OWNER CONTROLS Marketplace settings contain commission, minimum price, standard hold, payment mode, public-sales switch, confirmed tax code, and review confirmations. Fraud safeguards contain owner approval, new-seller period/hold, per-sale and rolling limits, and the score threshold. Only the owner can change these settings and approve money-related reviews; administrative MFA remains required in production. API keys and webhook signing secrets belong only in the private server configuration, never forum posts or uploaded models. Sellers: Approve seller or Suspend requires an owner review note. Review identity/verification, model rights, and restricted-product compliance; approval does not replace Stripe verification. Payment risk reviews: Review and release requires a note and a fresh provider check. Open Stripe reviews and highest-risk/fraudulent findings must be resolved in Stripe or refunded; the site cannot override them. Release preserves the original hold, and a new risk finding can hold the purchase again. Already-made transfers are flagged for recovery review and are not guaranteed recoverable. Refund, dispute, and money-operation panels record issues and provider-confirmed results. Retry pending money operations uses idempotent operations; old uncertain operations require reconciliation against the actual Stripe result, not an assumed success. Verify the matching sandbox/live account before acting. Sandbox tests use simulated money; do not approve the launch-review checkbox solely because automated tests pass. PRIVACY AND RETENTION Private AI reference/spec images, edited images, masks, and eligible unused working uploads can be cleaned up after seven inactive days. Active/referenced work is protected. Finished STL files, older finished GLBs, shared files, and retained purchased release copies are kept according to their retention rules. Purchased releases and required financial/acceptance records are excluded from temporary-reference cleanup. Download your own backups; permanent hosting is not promised. Full policy: https://homebrewprinting.com/marketplace-policy Retention: https://homebrewprinting.com/retention Use forum search to find Model Studio, Slicer Studio, Support Fin Studio, and print-order instructions. PREPARE BEFORE DOWNLOADING: ALL PARTS OR ONE FILE The main Prepare before downloading card opens all eligible printable model parts in Slicer Studio or Support Fin Studio. A button beside an individual file opens only that file, even when the listing has other parts. Archives are checked and supported printable entries are prepared; notes, pictures and G-code are not model geometry. Access and license checks still apply to every included file. Wait for transfer progress and check the destination part list before continuing. A Download button downloads its file; it does not open a studio. RELATED INSTRUCTIONS Model Studio tool directory · Slicer Studio · Support Fin Studio · Community models · Android app setup · Report a problem AUTOMATIC MODEL IMAGES When a model listing has no uploaded photo, Homebrew Printing creates a shaded preview from the first STL, OBJ, or 3MF file. It appears on model cards and in the listing gallery; you may briefly see Creating preview while it is prepared. Existing listings without photos receive previews when viewed. The original files are unchanged. Add a photo whenever you prefer your own image; uploaded photos always take priority. Automatic renders do not use an attachment slot or count as a model download. For other CAD/design formats, add a photo or include an STL, OBJ, or 3MF version. A paid model can use a completed automatic render in place of a photo; its other publishing requirements still apply.
Sign in to reply

Edit post