WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

3D MODEL BUILDING, COLORING & REPAIR TOOLS

STL Splitter with Connectors

Split a model into smaller printable parts, choose seams and connector pins, and download the parts for your printer. Review the layout and connector clearance before printing.

Model workerConnecting…
0Model queueChecking wait time…

New model project

Instructions

Split an oversized STL into printable parts with adjustable seams and connector pins. Review the layout and download parts for your printer.

STL Splitter · print larger models

Split an STL into pieces that fit your printer, with adjustable seams and connectors. Download every part and printable dowel in a ZIP, or send one selected part to another studio.

Cutting runs on your device. Only a selected studio transfer uploads a file. STL input, up to 90 MB; plans are limited to 128 grid cells. Use Cancel cut for a long operation.

Load an STL in the workspace below to get started.

Based on STL Cutter by Gluhy (MIT). Source & licenses.

BROKEN PART REPAIR

Rebuild the damaged area

Use a straight-on photo of matching features. Select a good half, quarter, or smaller region to mirror. Quarter and selected-region modes keep the rest of the part. Adjust the axes and review the copied details before approving.

Choose the intact side
Rebuilt reference

Select the good and damaged areas, then preview the rebuild.

Upload a reference image first.

OPTIONAL PHOTO SCALE

Use a quarter for scale

Place a US quarter about half an inch beside the part without touching it. Photograph directly overhead, with the coin and measured face in the same plane. Use the coin's outside edge, not its inner design. Align the part with the photo edges for easier measuring.

Best for flat brackets, covers, and key fobs. Thickness still needs a separate measurement. Scale estimates do not correct reconstruction errors or guarantee mounting-hole fit. Applying the crop clears old brushes and requires a fresh mirror preview.

Upload a reference image, then mark the quarter and part.