WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

3D MODEL BUILDING, COLORING & REPAIR TOOLS

MeshRight 3D Model Repair

Inspect and repair an STL, OBJ or other 3D mesh in your browser. Use Simple or Advanced mode to orient, resize, hollow or split the model, then save it or send it to a print preparation tool.

Model workerConnecting…
0Model queueChecking wait time…

New model project

Instructions

Inspect, repair, orient, resize, hollow or split a 3D mesh in MeshRight. Export the result or send it to Slicer Studio or Support Fin Studio.

MeshRight · check & repair

Inspect and repair a mesh, orient it, resize it, hollow it or split it into printable parts. Start with Simple mode or switch to Advanced for the full editing workspace.

Preparing your workspace…

Meshes are processed privately on the Homebrew Printing server. Up to 90 MB per upload. Idle workspaces close after 20 minutes; recent autosaves are retained for up to 24 hours. Download a .meshright project to keep your work. MeshRight by its contributors · GPLv3 · Source & license.

BROKEN PART REPAIR

Rebuild the damaged area

Use a straight-on photo of matching features. Select a good half, quarter, or smaller region to mirror. Quarter and selected-region modes keep the rest of the part. Adjust the axes and review the copied details before approving.

Choose the intact side
Rebuilt reference

Select the good and damaged areas, then preview the rebuild.

Upload a reference image first.

OPTIONAL PHOTO SCALE

Use a quarter for scale

Place a US quarter about half an inch beside the part without touching it. Photograph directly overhead, with the coin and measured face in the same plane. Use the coin's outside edge, not its inner design. Align the part with the photo edges for easier measuring.

Best for flat brackets, covers, and key fobs. Thickness still needs a separate measurement. Scale estimates do not correct reconstruction errors or guarantee mounting-hole fit. Applying the crop clears old brushes and requires a fresh mirror preview.

Upload a reference image, then mark the quarter and part.