WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Your first functional part in FreeCAD: sketch, Pad, Pocket, and test

Practical 3D printing help, settings, projects, and advice from fellow makers.

Design & CAD

P0k3sm0t
For a first FreeCAD project, choose a small plate or spacer with two holes. It teaches the sketch-to-solid workflow without burying you in a large assembly. A SMALL FUNCTIONAL PART 1. Set the intended units, create a document, and save it as a native FreeCAD file. Create a Body and a sketch on an origin plane in the Part Design workflow. 2. Draw a closed rectangle. Constrain its size and position intentionally so dragging a line cannot accidentally change the part. Use your own measured dimensions. 3. Use Pad to give the sketch thickness. Inspect the resulting solid before adding another feature. 4. Create an appropriate sketch for the two holes. Dimension the circle diameters and their center spacing. Pocket removes material; choose a through cut when the holes must pass through the plate. 5. Save, then change one original dimension and recompute. Check that the holes and solid still follow your design intent. 6. Add small edge treatments only after the basic geometry works. Check that the treatment leaves enough material around each hole. 7. Select the intended final solid for mesh export. Import the exported file into a slicer and confirm overall size, hole placement, and that only the intended object was included. Keep the native model for future edits. An STL is a useful printing output, but it is not a backup of the feature tree. Exact toolbar locations and labels can vary with FreeCAD version and workbench settings. MAKE A FIT TEST Print only the mounting interface before making the full accessory. Use the clearance-test guide to distinguish a design dimension from a working printed clearance. Then inspect your final slice in Slicer Studio. A shaded CAD view can hide a feature that becomes too thin for the selected nozzle. If a feature fails, share FreeCAD version, workbench, the feature name, and the first error. A cropped feature-tree screenshot and a shareable native file are useful; remove private information first. References: FreeCAD's official project, Part Design documentation, and Pocket documentation.
Sign in to reply

Edit post