Before committing to a long flexible print, make a small sample with a recorded baseline. The download provides an original 60 × 12 × 1.2 mm flex strip, editable OpenSCAD source, and a comparison sheet. It is a simple solid model; the chosen slicer settings determine its actual walls and infill.
SET UP A CONTROLLED FIRST TRY
1. Confirm your printer's extruder, filament path, and any automatic feeder support the particular TPU grade. Use the printer and filament maker's guidance for routing and feeding; do not assume a rigid-filament feeder can handle flexible material.
2. Start with a supported TPU profile for your machine and nozzle. Record the exact product, hardness, nozzle, temperatures, speed, cooling, retraction, and flow limit. There is no single temperature or retraction value that suits all TPU.
3. Check that the spool unwinds freely and the path is not dragging. Follow the filament maker's storage or drying instructions if moisture is suspected; spool construction and TPU formulations differ.
4. Confirm the bed surface and release method are suitable. Flexible material can bond strongly to some surfaces. Follow the surface manufacturer's instructions and let the sample cool before removing it.
5. Import the strip with its 60 × 12 mm face flat on the plate. Keep the supplied millimeter scale. Slice using your TPU profile, without supports. Inspect the first layer and the full 1.2 mm thickness before printing.
6. Watch the start of the test. If feeding stalls, the extruder clicks, or filament bunches up, stop and investigate the feed path instead of repeatedly raising flow or temperature.
COMPARE ONE CHANGE AT A TIME
Photograph both sides after cooling. Note surface gaps, strings, roughness, removal difficulty, and whether the strip bends as your application needs. Keep an unchanged baseline sample alongside the next one. If testing speed, keep temperatures and retraction fixed; if testing retraction, restore the baseline speed first.
A thin strip can demonstrate feeding and finish, but does not establish the strength, fatigue life, dimensional accuracy, or suitability of a finished strap, seal, or protective part. Its flexibility also changes with wall count and internal structure. Repeat with a small section of your actual design before scaling up.
Download first TPU print kit (ZIP)
Download flex strip (STL)
Download checksums (JSON)
The mesh was checked and software-sliced; it has not been physically printed. Slice it for your own printer rather than using somebody else's G-code.
Open Slicer Studio
Prusa's flexible-material overview
Prusament TPU 95A guide: a product-specific example
Share your printer, TPU product and hardness, profile, and a photo of the sample. Mention what you changed and whether it helped so the next person can reproduce the comparison.