WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

U.S. 3D printing laws and bills: state measures and Congress — October 2026

Practical 3D printing help, settings, projects, and advice from fellow makers.

Print safety

P0k3sm0t
U.S. 3D PRINTING LAWS AND BILL WATCH Legal summaries checked October 24, 2026; Connecticut source links refreshed October 27, 2026. Coverage: federal measures, selected state laws and proposals, and an official research directory covering all 50 states, D.C., and territories. The headlines can be confusing: owning a printer, selling a printer, manufacturing a regulated object, and sharing its design files are different legal questions. A bill can also change substantially before becoming law. This guide separates those issues so makers can follow the actual text. This is an informational starting point, not a complete 50-state legal survey or advice about a particular project. The state entries below are selected examples, not a list of every applicable law. Local ordinances, exceptions, agency rules, effective dates, and court orders can change the answer. Check the linked records before acting; an unlisted state is not an assurance that an activity is lawful. HOW TO READ THE STATUS • LAW: enacted legislation or an existing statute. Read the effective-date provisions and exceptions. • FUTURE / CONDITIONAL: enacted, but a particular requirement starts later or depends on standards and rulemaking. • PROPOSAL — NOT LAW: introduced or advancing through the legislature. Passing one chamber is not enactment. • NOT ENACTED / STALLED: the cited measure did not become law in the record checked. A later bill or amendment may be different. Most of the printer-specific measures discussed below concern firearms, components, or manufacturing code. They should not be described as a general ban on ordinary household prints. Some measures do reach the printer sales market, which is why their exact scope and start dates matter to everyone buying or selling equipment. CONGRESS AND FEDERAL RULES PROPOSAL — NOT LAW: H.R. 4143 and S. 2165, 119th Congress — 3D Printed Gun Safety Act of 2025. These companion bills would prohibit intentionally distributing online digital instructions that automatically program a 3D printer or similar device to produce a firearm or complete one from an unfinished frame or receiver. The official status records checked still show Judiciary Committee referrals on June 25, 2025. These are proposed restrictions on particular files, not enacted nationwide printer-registration or background-check requirements. House bill and official text Senate bill and official text LAW: Existing federal firearms rules still apply regardless of manufacturing method. Federal definitions can cover frames, receivers, and other regulated items; being printed in plastic does not remove an object from firearms law. ATF's frame-or-receiver guidance explains the rule affecting certain kits and unfinished products. Federal requirements also do not override stricter state or local restrictions. ATF: frame-or-receiver rule Federal firearms definitions The Undetectable Firearms Act, 18 U.S.C. 922(p), already prohibits specified conduct involving firearms that fail its detectability requirements, subject to statutory exceptions. That existing law is separate from the pending file-distribution bills. Federal unlawful-acts statute: see subsection p FUTURE REQUIREMENT — DEFENSE PROCUREMENT: Public Law 119-60, section 849, restricts Department of Defense procurement of covered additive-manufacturing machines beginning one year after December 18, 2025. It concerns specified suppliers and government purchasing, with exceptions. It is not a nationwide prohibition on a hobbyist owning a consumer printer. Official Public Law 119-60: search the text for section 849 STATE MEASURES WITH IMPORTANT 2026 DEVELOPMENTS CALIFORNIA — ENACTED; PRINTER SALES REQUIREMENT IS CONDITIONAL AB 2047, Chapter 461, was signed September 26, 2026. DOJ must begin quarterly checks for ASTM firearm-blocking standards no later than July 1, 2027. Qualifying standards and a feasibility determination trigger later DOJ guidance or regulations; the sales requirements start one year after that guidance or those regulations are published. If no ASTM standards have been published as of July 1, 2029, the statute ends the obligation to keep checking. The provision addresses sales, offers for sale, and transfers for consideration; it does not itself order every owner to retrofit an already-owned machine. Read the final chaptered version, since early drafts differed. Governor's signed-bills announcement Official chaptered AB 2047 text — California Legislature AB 2047 summary — California Senate, PDF NEW YORK — ENACTED; KEEP THE CRIMINAL AND PRINTER-SALES PROVISIONS SEPARATE Penal Law 265.10(11) and (12) address digital firearm manufacturing code, with licensing, intent, knowledge, location, and other exceptions that matter. The law should not be summarized as banning every CAD file. Separately, General Business Law 396-eeee establishes a blocking-technology requirement for printer sales or deliveries, but its effective-date note makes that requirement start one year after the specified rules are promulgated. Executive Law 837-aa requires a working-group feasibility review and provides that regulations are not required while the group finds the technology infeasible. It also defines covered machinery to include additive and subtractive manufacturing. Current criminal provisions Printer-sales provision and effective-date note Working group, feasibility, and rulemaking WASHINGTON — LAW IN EFFECT; A DIFFERENT PRINTER-BLOCKING BILL WAS NOT ENACTED HB 2320 became Chapter 203 and took effect March 24, 2026. It addresses firearm manufacturing and digital manufacturing code. For example, RCW 9.41.327 restricts making frames or receivers with a printer or CNC machine and certain code distribution or possession with intent, with exceptions for specified federal licensees. Read the relevant component-specific sections rather than assuming all file possession is prohibited. HB 2321 was a separate proposal for printer blocking technology; its official history stops at committee referral and shows no enactment. Do not confuse the two bills. HB 2320: law and effective date Current frame/receiver provision HB 2321: unenacted blocking proposal COLORADO — ENACTED MANUFACTURING RESTRICTIONS HB26-1144 prohibits knowingly producing potentially functioning firearms, unfinished frames or receivers, large-capacity magazines, or rapid-fire devices by what it defines as 3D printing, including additive and subtractive manufacturing. Exceptions include federally licensed manufacturers and accredited gunsmithing programs. The legislature's enacted summary concerns those regulated objects; it is not a general printer-purchase approval requirement. Do not treat the introduced version's file provisions as the final act. HB26-1144: enacted summary, history, and signed act NEW JERSEY — EXISTING LAW; DIGITAL-INSTRUCTION PROVISION ALSO MATTERS Current N.J.S. 2C:39-3(o) addresses knowing possession of firearm digital instructions with intent to manufacture a firearm by a person not licensed or registered to manufacture firearms. This is an intent-and-licensing provision, not a general prohibition on owning ordinary model files or a 3D printer. Consult the related manufacturing and distribution provisions as well before dealing with regulated files or objects. Current N.J.S. 2C:39-3, including subsection o MAINE — ENACTED; SERIALIZATION PENALTIES HAVE A LATER START LD 1126 became law without the governor's signature on January 11, 2026, as Public Law Chapter 537. It addresses undetectable firearms and firearms, frames, or receivers without serial numbers. The chapter's serialization-violation section begins January 1, 2027. That date should not be assumed to delay every provision of the act. Read the chapter for its exceptions and separate requirements. LD 1126: official disposition and chapter download VIRGINIA — ENACTED; IMPORTANT 2027 START DATES HB40 and identical SB323 address unserialized firearms and completed or unfinished frames or receivers. The state's 2026 legislative summary identifies January 1, 2027, for the specified manufacturing/transaction provisions and July 1, 2027, for the specified knowing-possession provision. These are regulated-object rules, not a general registration requirement for household printers. Virginia's official 2026 legislative summary: search HB40 Governor's account of the signed measures OTHER EXISTING STATE RULES MAKERS SHOULD NOT OVERLOOK These examples concern the printed object or its regulation; they are not interchangeable with proposals to make ordinary printers scan files. CONNECTICUT: The state code separately addresses manufacturing polymer-plastic firearms without the required detectability, unfinished frames/receivers, and identification requirements for manufactured firearms. See 53-206i, 53-206j, and 29-36a. Connecticut: section 53-206i, polymer-plastic firearm detectability Connecticut: section 53-206j, unfinished frames and lower receivers Connecticut: section 29-36a, manufacturing identification provisions The legislature directs readers to use the base statutes together with the annual supplement. Check the 2026 public-safety supplement and 2026 state-police supplement for amendments; the supplements do not repeat every unchanged section. ILLINOIS: State Police's official notice explains the serialization rules for printed firearms and unfinished frames or receivers, plus restrictions and exceptions for unserialized items. This is not a license requirement for an ordinary printer. Illinois State Police: Ghost Guns Notice (PDF) MARYLAND: Public Safety 5-703 restricts transactions involving unserialized unfinished frames or receivers and possession of unserialized firearms, with listed exceptions. Printing rather than machining does not by itself resolve compliance. Maryland: current section 5-703 MASSACHUSETTS: Chapter 140, section 121C sets out firearm serialization and privately made firearm requirements, including obtaining a number before manufacture/assembly and registration requirements. Read the exceptions and implementation rules. Massachusetts: section 121C RHODE ISLAND: Section 11-47-8(e) expressly addresses firearms produced by a 3D-printing process as well as ghost guns and undetectable firearms, with a specified federally licensed manufacturer exception. This is broader than simply requiring a serial number. Rhode Island: section 11-47-8(e) DISTRICT OF COLUMBIA: D.C. has its own ghost-gun definitions and restrictions in its firearms-control chapter. Do not use a neighboring state's rules as a substitute. D.C. firearms-control code PROPOSALS AND STALLED MEASURES — NOT CURRENT REQUIREMENTS FROM THESE BILLS DELAWARE HB 399, 153rd General Assembly: Introduced June 11, 2026; the official record checked shows House Judiciary referral, no chapter number, and no effective date. It proposes blocking technology for printer sales/deliveries, manufacturer attestations, a feasibility group, and a later rulemaking trigger. It is not an enacted printer-blocking requirement. Delaware separately has statutory language concerning printed firearm manufacture and file distribution in Title 11, section 1463; the absence of a new printer bill does not erase existing law or the need to check litigation. HB 399: official status and text Delaware code: see section 1463 NEW YORK A2228 / S3562, 2025–2026: These separate proposals would require criminal-history checks for purchases of printers capable of producing firearms. Both official histories checked show Codes Committee referrals on January 7, 2026, not enactment. Do not confuse this proposal with New York's enacted 2026 budget provisions described above. A2228 S3562 MINNESOTA SF4067 / HF3874, 2025–2026: The Senate passed the omnibus firearms proposal on May 4, 2026. The official record checked does not show enactment. Senate passage alone does not make its proposed manufacturing restrictions state law. SF4067: official status, versions, and companion link PENNSYLVANIA HB1099, 2025–2026: This undetectable-firearms proposal was defeated on House final passage September 30, 2025; the history also records a reconsideration motion. It is not an enacted statewide requirement from that bill. Keep its actual text separate from proposed amendments and from municipal ordinances. HB1099: official text, votes, and history FIND YOUR STATE — ALL 50, PLUS D.C. AND TERRITORIES Use the Library of Congress state-law directory to select your state and find its legislature, statutes, regulations, and courts. States not summarized above still require research; this post makes no “no restrictions” finding for them. For a useful search, try: “three-dimensional printer,” “3-D,” “additive manufacturing,” “digital firearm manufacturing code,” “unfinished frame,” and “privately made firearm.” Search the current legislative session as well as the existing code. A bill number alone is not enough: include the state, chamber, and session/year. To check a claim or submit a helpful update: 1. Open the legislature's official bill page and read the latest action. 2. Find the final enrolled/chaptered text, not just the introduced summary. 3. Read the effective-date and rulemaking sections; look for conditions and exceptions. 4. Check relevant agency notices and court orders. A lawsuit being filed does not itself suspend a law. 5. Share the state, bill/session, official link, date checked, and the exact provision that changed. Keep discussion respectful and separate legal text from opinions about the policy. THE LAW IS ALSO ABOUT WHAT YOU SELL AND SHARE Ordinary model printing raises other legal questions even when no printer-specific bill applies. Download access is not the same as permission to resell a design or copies. Check the creator's license; copyright can protect separable artistic features, while patents can cover inventions or designs. U.S. Copyright Office: useful articles USPTO: patent basics Selling printed consumer products can bring product-safety requirements, including rules specific to children's products. Being a small seller is not a blanket exemption. Medical devices also have FDA requirements regardless of whether they are printed or made another way. CPSC: small-business product-safety resources FDA: its role in 3D printing For this forum, share official legal sources and ordinary maker questions. This thread is for understanding legislation, not for distributing regulated weapon files or instructions to defeat restrictions. Have an official update from your state? Add the bill/session and source in a reply so others can verify it.
Sign in to reply

Edit post