WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Unknown G-code commands: diagnose profile mismatches without breaking arcs

Practical 3D printing help, settings, projects, and advice from fellow makers.

Marlin

P0k3sm0t
“Unknown command” identifies a command the firmware did not accept. Diagnose the exact line and the selected profile before altering a whole G-code file. TRACE THE SOURCE 1. Record the full error and firmware/version. Keep a private copy of the original downloaded G-code. 2. Open the file as text and locate the command. Is it in start/end code, a tool-change script, or generated motion? Copy only a small redacted excerpt into the worksheet. 3. Check that the slicer's printer profile and G-code flavor match the actual machine. Review custom scripts inherited from another printer. 4. Read the command's documentation and feature requirements. A command existing in a firmware project's manual does not mean your compiled build enables it. 5. Correct the responsible profile or script, re-slice, and inspect the new file. Avoid bulk deletion of unfamiliar commands; some affect coordinates, extrusion, tools, or temperature. 6. Verify on an appropriate small job only after understanding the change. Do not send motion or reset commands as experiments during an active print. G17 AND ARCS ARE SEPARATE QUESTIONS In Marlin, G17–G19 select workspace planes when CNC_WORKSPACE_PLANES is enabled. G2/G3 arc support has its own requirements. Accepting arcs does not automatically mean a build accepts every plane-selection command. Rejecting G17 is not, by itself, a reason to discard otherwise supported G2/G3 motion. For ordinary printer-specific slicing, use a matching profile that emits the commands your machine supports. Keep the error's exact wording when reporting a problem. Download unknown-command report kit (ZIP) Download release checksums (JSON) Contains a checklist and blank report worksheet. No executable G-code, firmware, or machine settings are supplied. References: Marlin G17–G19 and Marlin G2/G3. Include a Slicer Studio project only if you can share it without exposing private information.
Sign in to reply

Edit post