Choose orientation by balancing strength, surface quality, accuracy, support use, and print stability.
Place important flat mating surfaces where they will print cleanly. Keep holes and pins oriented for acceptable roundness. Point layer lines along expected loads. A broad bed contact area improves stability, but the largest face is not always the strongest orientation.
Use supports only where needed. Check the slicer preview layer by layer, especially under internal ledges, bridges, holes, and islands. Increase support distance for easier removal or reduce it for cleaner undersides, within the limits of the printer and material.
Paint-on supports and blockers help protect visible surfaces. Tree or organic supports can reduce contact on complex shapes; conventional supports may be better for large flat ceilings. A small orientation change can remove more support than extensive tuning.
After slicing, confirm that every new island has a path to the bed or to support.
USING THIS ON HOMEBREW PRINTING
Support Fin Studio exports support geometry or sends it to Slicer Studio. Select No supports only when fins or the model orientation cover every required area; inspect thin islands and the sliced result. Normal/tree supports, interfaces, and local modifiers serve different purposes. Exporting does not start a printer.
Use forum search to find the related studio instructions for the current controls.
HOMEBREW / 3D PRINTING CONVERSATIONS
Choose print orientation and supports without damaging the part
Practical 3D printing help, settings, projects, and advice from fellow makers.
Slicing & print settings