Part strength begins with orientation. Put the main load along the printed roads when possible and avoid pulling layers apart across the Z direction.
Walls usually improve functional-part strength more efficiently than very high infill. Four walls with moderate infill often outperform two walls with dense infill. Top and bottom thickness also matters around fasteners and loaded faces.
Lower layer heights improve detail but do not automatically create the strongest part. Choose a layer height appropriate for the nozzle and ensure adjacent lines bond well. Temperature, cooling, flow, speed, and dry filament all affect layer adhesion.
Use infill to support top surfaces and spread loads. Gyroid, cubic, and grid can work well, but the pattern matters less than orientation, walls, material, and good extrusion for many parts.
Preview the sliced toolpaths. Look for thin features that disappear, unsupported bridges, weak seams, tiny isolated sections, and abrupt changes in cross-section.
USING THIS ON HOMEBREW PRINTING
Use grouped advanced settings and local object/modifier overrides in Slicer Studio, then inspect a new slice. Vase mode normally makes a single continuous wall and is not a general strength setting.
Use forum search to find the related studio instructions for the current controls.
HOMEBREW / 3D PRINTING CONVERSATIONS
Layer height, walls, infill, and orientation: what really adds strength
Practical 3D printing help, settings, projects, and advice from fellow makers.
Slicing & print settings