Keep a reusable model or project as well as the file you send to the printer. They serve different purposes.
STL: SHARE THE SHAPE
STL contains a triangle mesh. It does not retain your painted colors, filament assignments, or slicer process settings. When importing, check dimensions and units rather than assuming the part will arrive at the correct scale.
3MF: KEEP A PROJECT OR A RICHER MODEL
A 3MF can carry model information beyond a basic STL, and slicers commonly use it for projects. However, a 3MF is not automatically a complete project, and different applications do not necessarily interpret every setting or color extension the same way. Reopen the export and check what actually survived.
G-CODE: RUN A SPECIFIC PRINT JOB
G-code is the sliced instruction file for a particular printer setup. Do not run an unfamiliar file just because its model looks correct. Check the machine, bed size, nozzle, material, temperatures, and start/end behavior; when in doubt, slice the original model for your own printer.
A SIMPLE SAVING CHECKLIST
1. Keep the original model or editable design.
2. Save the working slicer project with a meaningful revision name.
3. Reopen an exported 3MF and inspect dimensions, objects, colors, and profiles before relying on it.
4. Slice for the intended machine and inspect the preview.
5. When sharing, include printing notes and the license, and remove private information from files and profiles.
TRY IT HERE
Use Slicer Studio for preparation and Community Models for permitted sharing. A colored screenshot cannot restore colors that were discarded by exporting STL.
Have a file that reopens differently? Reply with the exporting and importing applications and versions, what changed, and a shareable example.
References: Prusa's supported file formats and Homebrew Slicer Studio instructions.
HOMEBREW / 3D PRINTING CONVERSATIONS
STL vs 3MF vs G-code: which file should you save or share?
Practical 3D printing help, settings, projects, and advice from fellow makers.
Getting started