WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Split a model for a smaller printer: alignment pins and an assembly test

Practical 3D printing help, settings, projects, and advice from fellow makers.

Design & CAD

P0k3sm0t
Choose the cut for assembly as well as bed size. A part that fits on the plate can still be difficult to align, clamp, finish, or load after joining. PLAN AND PRACTICE THE JOINT 1. Keep the original model. Choose a cut that gives each part useful bed contact, preserves critical features, and leaves enough material around connectors. 2. Decide how the assembly locates and how it is retained. Alignment pins do not automatically make a joint load-bearing; adhesive, screws, or other retention have separate requirements. 3. Make a small test of the actual joining region, using the intended material and print orientation. Measure hardware instead of assuming a universal printed clearance. 4. Use the supplied practice coupon to understand the workflow. Print the left half, right half, and TWO pins. Read the README's face orientation: the left X20 face meets the right X0 face. 5. Slice each piece with its bottom on the bed. Inspect the horizontal hole ceilings and decide whether the geometry, orientation, or support strategy needs changing. 6. Let parts cool and dry-fit gently. Record alignment, looseness, interference, and any hole cleanup. Adjust before printing the large model. The default halves are each 20 × 20 × 12 mm. Blind holes are nominally 3.4 mm in diameter and 6 mm deep; pins are 3 mm × 10 mm. Those are trial dimensions, not a promised fit. The two 6 mm recesses leave space beyond the 10 mm pin when faces meet. Download split-model alignment kit (ZIP) Download release checksums (JSON) Includes three STLs, editable SCAD with left/right/pin selections, and a worksheet. All three meshes passed geometry checks; the joint has not been physically fitted or load-tested. Inspect the final pieces in Slicer Studio. Reference: PrusaSlicer's cut-tool and connector documentation, which describes that application's controls rather than promising identical controls in every slicer.
Sign in to reply

Edit post