You already have a printer set up. You should not need to rebuild it just to bring over a tested process and filament combination. This checklist covers Homebrew Printing's current Preset actions import, then checks the saved result instead of trusting a preset name alone.
Move your OrcaSlicer printer, process and filament settings together, then review them before slicing in
Slicer Studio. This guide explains preset import and saved-project checks; it does not promise compatibility with every other slicer.
BEFORE YOU IMPORT
Keep an untouched copy of the OrcaSlicer export and an existing Homebrew project. Write down the printer, nozzle diameter, process, and filament names you expect. Export a complete printer bundle when possible; a small JSON that inherits from another preset may need its parent definitions before its values can be resolved.
IMPORT INTO YOUR EXISTING PRINTER
1. Open
Slicer Studio and select the intended saved printer under My printers.
2. In Printer, open Preset actions, then Import. Choose the .orca_printer export. The importer also accepts supported Orca bundles and profile JSON; the file extension alone does not guarantee that every dependency is present.
3. Wait for the import review to finish. Read any missing-parent, unsupported-setting, or skipped-setting messages. Resolve these before treating the import as complete.
4. Keep the existing printer's name to update that printer, then choose Update printer and import presets. Use a different profile name if you intend to create a separate printer instead. Cancel leaves the saved printer unchanged.
5. Select the imported process and filament presets. They belong under the printer you imported into; check the active names rather than assuming every imported filament is simultaneously selected.
CHECK VALUES, THEN SAVE
Use the worksheet to compare nozzle and bed dimensions, machine G-code flavor, layer heights, walls, infill, temperatures, cooling, retraction, speeds, acceleration, and any start/end scripts. A matching profile name is not proof that its values match.
Save a project with a small familiar model. Reopen it and verify the selected printer, process, filament, and a few deliberately recognizable settings. Projects retain a settings snapshot; later edits to a library preset should not silently replace that saved job's settings. Export a project 3MF and reopen it while retaining the file's print settings. A generic geometry-only 3MF is a different kind of file.
Slice, inspect the layer preview, and check the G-code's configuration and relevant temperature/speed commands. Travel planning, firmware limits, first-layer overrides, and short moves can prevent a requested speed from being reached everywhere. Do not expect every desktop-only option to become a machine command.
Download Orca preset transfer kit (ZIP)
Download checksums (JSON)
The kit includes an inventory, comparison worksheet, and checklist. It contains no machine profile or ready-to-print G-code. Do not post API keys or private start/end script credentials when requesting help.
Full Slicer Studio instructions
OrcaSlicer's import and export documentation
If a setting differs, reply with the export type, software versions, setting name, expected value, and observed value. A small reproducible example is much more useful than an entire private printer configuration.