WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Multicolor printing: reduce waste with AMS and tool changer setups

Practical 3D printing help, settings, projects, and advice from fellow makers.

Slicing & print settings

P0k3sm0t
Two models with the same number of colors can have very different print times and waste. What matters includes where those colors appear and how often the printer changes tools or filament. KNOW WHICH SYSTEM YOU HAVE A single-nozzle filament changer, such as an AMS-style setup, swaps filament through a shared melt path. A tool changer uses separate tools. These require different printer profiles and change routines; do not substitute one configuration for the other. COMPARE THESE BEFORE A LONG PRINT 1. Assign each visible color to a real loaded filament or intended tool. A screen swatch does not change the plastic physically loaded in the machine. 2. Inspect the sliced color distribution layer by layer. A logo that uses another color on every layer can create many more changes than a design with a few color bands. 3. Compare an orientation or split-part design that reduces repeated changes while preserving the surfaces and strength you need. 4. On single-nozzle systems, verify flushing for demanding transitions, especially dark to light. Reducing flushing too far can contaminate the next color. 5. Keep the profile's priming/wipe strategy for the first test. Separate nozzles can still need flow stabilization and ooze control; owning a tool changer is not a blanket reason to remove its tower. 6. Compare one copy with several copies on the same plate. Shared changes may improve waste per finished part, but inspect the resulting total time, material, and plate layout. TRY IT HERE Save both versions in Slicer Studio. Start with a small color sample and inspect transitions before scaling up. Different material families also need compatible temperatures, adhesion, and printer support. Reply with printer type, loaded colors, number of copies, estimated time, and model versus flushing/tower material where reported. Real comparisons help more than a universal “best purge” number. References: OrcaSlicer multimaterial settings and Prusa's wipe tower explanation.
Sign in to reply

Edit post