An apparently empty interior can be a preview filter, a setting override, or a model with no space left for sparse infill. Check those separately before changing the entire printer profile.
SIX CHECKS BEFORE YOU PRINT
1. Slice again after changing settings. Make sure Preview belongs to the selected plate and current model.
2. Move the layer range into the middle of the part. Looking only at the bottom or top solid layers will not show its sparse interior. Enable the infill feature in the preview legend if it is hidden.
3. Check sparse infill density and pattern on the actual object. A local object or modifier setting can differ from the process default. Check whether vase mode was enabled unintentionally.
4. Look at wall thickness. A narrow section can be occupied entirely by walls; adding infill density cannot create extra internal space.
5. Remember that cubic is a three-dimensional pattern assembled across layers. One layer is not a picture of the completed lattice. Adaptive patterns deliberately change spacing through the model.
6. Compare the same small solid test block with a second pattern and the same density. If both previews are empty, investigate the model, overrides, and feature visibility before blaming cubic.
Infill percentage describes the infill region, not the percentage of the entire part that is plastic. Walls and solid surfaces contribute separately.
TRY IT HERE
Open Slicer Studio. Save a project before changing several settings. A downloadable G-code file alone does not confirm the preview is complete.
If the mismatch remains, reply with a screenshot of a middle layer, the pattern and density, nozzle size, wall count, and whether the downloaded file looks correct in another compatible preview. Share only files you have permission to share.
Reference: OrcaSlicer infill documentation.
HOMEBREW / 3D PRINTING CONVERSATIONS
Missing infill in the slicer preview? Check these six things
Practical 3D printing help, settings, projects, and advice from fellow makers.
Slicing & print settings