Probing the bed, saving a mesh, and using that mesh during a print are separate steps. A visible mesh is not proof that leveling compensation is active.
CHECK THE MECHANICS FIRST
Make sure the plate is seated, the probe mount is secure, and the bed and gantry do not wobble. Tram the machine as its design requires. A mesh should not hide loose hardware.
THEN CHECK THE FIRMWARE WORKFLOW
1. Identify the leveling system configured in your Marlin build: manual mesh, bilinear, unified leveling, or another supported method. G29 has different behavior across these systems.
2. Follow that system's procedure to measure and, where applicable, save or load the mesh. Unified Bed Leveling also has mesh-slot behavior; do not assume another system's command sequence applies.
3. Inspect the generated start G-code. In Marlin's default behavior, G28 disables leveling. Firmware options can restore or enable it afterward.
4. For configurations using an already available valid mesh, M420 S1 is commonly used after G28 to enable compensation. It does not create a mesh or fix incorrect probe offsets. Verify the appropriate sequence for your actual build.
5. Check for later start-script commands that home, reset, load, or otherwise change the state again.
6. Print a small first-layer test and compare the whole usable area. Uniformly wrong nozzle height suggests a different problem from one corner being wrong.
Keep the printer, plate, nozzle, temperatures, and test model consistent while troubleshooting. Record what changed after a firmware update or probe replacement.
In Slicer Studio, inspect the final downloaded G-code as well as the editable start-script field. Do not paste a generic probing routine into an unfamiliar machine.
Reply with Marlin version, leveling method, probe type, and a redacted start-script excerpt.
References: Marlin automatic bed leveling, homing and leveling state, and manual mesh documentation.
HOMEBREW / 3D PRINTING CONVERSATIONS
Marlin bed leveling: why a saved mesh may not be used
Practical 3D printing help, settings, projects, and advice from fellow makers.
Marlin