WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

Your first successful 3D print: a practical checklist

Practical 3D printing help, settings, projects, and advice from fellow makers.

Getting started

P0k3sm0t
Use this checklist before chasing advanced settings. 1. Confirm the printer is mechanically sound. The frame should be square, belts snug rather than guitar-string tight, wheels or rails should move smoothly, and the bed and hotend should not wobble. 2. Install the correct nozzle size and select the matching printer, nozzle, and filament profiles in your slicer. 3. Clean the build plate with the method recommended by its manufacturer. Keep fingerprints away from the print area. 4. Heat the printer, run bed leveling or mesh calibration, and set the first-layer offset. A good first layer has joined lines with no gaps, but it is not scraped paper-thin. 5. Start with dry, known-good PLA and the temperature range printed on its spool. 6. Slice a small calibration model at a moderate speed. Check the preview for missing walls, unexpected supports, and the correct build-plate position. 7. Watch the entire first layer. Stop the job if material is not sticking, the nozzle is dragging, or a cable can catch. When asking for help, include your printer, material, nozzle size, layer height, temperatures, speed, slicer, a clear photo, and what changed before the problem began. USING THIS ON HOMEBREW PRINTING In Slicer Studio, select Common printer or your saved Custom printer, the actual nozzle, filament, and process. Search settings to find controls. Save changes to the selected printer while signed in; guest settings are temporary. Use forum search to find the related studio instructions for the current controls.
Sign in to reply

Edit post