Choose material from the part’s environment and job.
PLA is easy to print, stiff, and good for prototypes, decorations, and many indoor parts. It softens at relatively low temperatures and can be brittle.
PETG offers better heat and impact resistance for many functional parts. It can string and may bond aggressively to some build surfaces.
TPU is flexible and abrasion resistant. Use controlled speeds and a well-constrained filament path.
ABS and ASA tolerate more heat. ASA also handles outdoor ultraviolet exposure better. Both benefit from an enclosure and appropriate ventilation.
Nylon can be tough and fatigue resistant but readily absorbs moisture and often needs careful drying, storage, and bed preparation. Fiber-filled materials are abrasive and usually require a wear-resistant nozzle.
Manufacturer data varies. Check the specific spool’s temperature, drying, enclosure, nozzle, and safety guidance rather than relying only on the material family name.
USING THIS ON HOMEBREW PRINTING
Upload an Orca filament JSON or create a custom filament and save it with your custom printer. A compatibility base is not your filament brand. Set temperatures, flow, volumetric limits, retraction, cooling, and chamber controls to match the real material and hardware.
Use forum search to find the related studio instructions for the current controls.
HOMEBREW / 3D PRINTING CONVERSATIONS
PLA, PETG, TPU, ABS, ASA, and nylon: choosing the right filament
Practical 3D printing help, settings, projects, and advice from fellow makers.
Filament & materials