WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

HOMEBREW / 3D PRINTING CONVERSATIONS

How to tell when filament is wet—and how to store it

Practical 3D printing help, settings, projects, and advice from fellow makers.

Filament & materials

P0k3sm0t
Moist filament can cause popping, steam, rough surfaces, stringing, weak extrusion, and inconsistent flow. Some materials absorb moisture much faster than others; nylon, TPU, and many support materials are especially sensitive. Store opened spools in a sealed container or bag with active desiccant. A room dehumidifier helps the room but is not a substitute for sealed storage in humid conditions. Use humidity indicators when practical. Dry filament at the temperature and duration recommended by its manufacturer. A food oven can overshoot badly and deform a spool, so use equipment with stable low-temperature control and verify the actual temperature. Keep filament away from heaters, open flames, and children. Drying cannot fix contamination, severe heat damage, a worn nozzle, or incorrect slicer settings. Compare with a known-good spool when diagnosing inconsistent extrusion. USING THIS ON HOMEBREW PRINTING Record dry-storage and calibration notes alongside your saved filament settings. Slicer cooling or retraction changes do not dry a wet spool. Use forum search to find the related studio instructions for the current controls.
Sign in to reply

Edit post