A fan's nominal size does not define every mounting dimension. Start with the actual hole centers, airway, fasteners, available height, and nearby moving parts.
BUILD YOUR ADAPTER FROM MEASUREMENTS
1. Extract the kit and open fan-adapter.scad in OpenSCAD. The example transitions between two square mounting flanges around a circular airway.
2. Measure both fans. Record hole spacing, bore or usable opening, screw diameter/head clearance, flange thickness, and cable position in the included worksheet.
3. Replace the example parameters. The supplied defaults are illustrative: 105/71.5 mm hole spacing, 110/72 mm airway diameters, 4.5 mm bolt holes, and 30 mm overall height. They are not a compatibility promise for all nominal 120/80 mm fans.
4. Render the complete model. Inspect the inside passage, wall continuity, corner fasteners, and whether the smaller flange leaves room for tools and cables.
5. Export STL and import it in millimeters. The default overall size is 128 × 128 × 30 mm. Confirm dimensions, support needs, bed contact, and layer toolpaths in Slicer Studio.
6. Test the mounting interface before running a fan. Check blade clearance, vibration, air leaks, temperature suitability, and that the assembly cannot foul printer travel.
An adapter can change restriction and noise. A printable shape is not proof of improved airflow; compare the actual installation using a repeatable method and avoid claiming a pressure or flow rating without measurements.
Download editable fan-adapter kit (ZIP)
Download release checksums and geometry checks (JSON)
Includes original SCAD, STL, nominal dimensions, and a measurement worksheet. The default mesh is a closed single solid at the stated overall size. Physical fit, airflow, noise, sealing, and service temperature have not been tested.
Share your measured fan models, revised source, material, orientation, and installed results. Reference: OpenSCAD documentation.
HOMEBREW / 3D PRINTING CONVERSATIONS
Design a custom fan adapter: measurements, editable CAD, and a test model
Practical 3D printing help, settings, projects, and advice from fellow makers.
Projects and makes