WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

About this model

Designed by Robdeloach

No Soliciting Sign. Original creator notes: A "No Soliciting" sign to put on your front door. It is 240mm x 80mm x 2mm. The base is 1mm with the letters and border raised another 1mm. It is designed in Fusion 360 and printed on a Prusa MK2s. I used the Prusa ColorPrint website to inject the code to change filaments at 1.2mm. http://www.prusaprinters.org/color-print/ With the successful print, I did the filament change at 1.2mm. When I designed it, I planned to do the change at 1mm. But there was a problem when I did the color change at 1mm. As you can see by the close up photo, there is a flaw in the "N". It did the color change before the 1mm layer was 100% complete. It is hard to see if the difference if you do the color change at 1.2 and you can avoid the same problem I had with my first attempt at printing it. # Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: .2 Infill: N/A Notes: Used Prusa ColorPrint to have it pause and change the filament at 1.2mm. http://www.prusaprinters.org/color-print/ Original design: No Soliciting Sign Creator: Robdeloach Source: https://www.thingiverse.com/thing:2420656 Original license: CC BY 3.0 — https://creativecommons.org/licenses/by/3.0/ Shared unchanged from the owner’s downloaded archive. Model files are unmodified; preview resized for display. No affiliation or endorsement implied.

Printer: Use a compatible profile for your own printer
Slicer: Not specified · Material: Not specified · Nozzle: Not specified