WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

About this model

Designed by supasorn

Adjustable Belt Tensioner/Tightener and Belt Tie (Tevo Tarantula). Original creator notes: A simple, adjustable belt tensioner + a belt tie to replace the cable tie. The tensioner requires an M3 screw. The screw hole is tight-fit and should provide more than enough tension to hold the screw. Designed to be printed at 100% scale. Use higher wall line count (shells) & high infill for maximum strength. The calibration cube in 3rd photo was printed @0.1mm layer height with *properly* tensioned belts and a Dual Z mod https://www.thingiverse.com/thing:2163949 sketchup/fusion360 file is attached in case adjustment is needed. **Update 3/11/17 : New hole, added fillet. **Update 10/23/16 : increased thickness for screw holder and legs. # Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 50% Original design: Adjustable Belt Tensioner/Tightener and Belt Tie (Tevo Tarantula) Creator: supasorn Source: https://www.thingiverse.com/thing:1780636 Original license: CC BY 3.0 — https://creativecommons.org/licenses/by/3.0/ Shared unchanged from the owner’s downloaded archive. Model files are unmodified; preview resized for display. No affiliation or endorsement implied.

Printer: Use a compatible profile for your own printer
Slicer: Not specified · Material: Not specified · Nozzle: Not specified