About this model
Designed by BZH1
Totoro - Multi Material. Original creator notes: As part of my learning curve for the Prusa MK2s Multimaterial, I decided to try cut up the Totoro designs on the site (https://www.thingiverse.com/thing:12146) & (https://www.thingiverse.com/thing:1347935). Seems to come out OK :-) # Print Settings Printer Brand: Prusa Printer: i3 MK2 MMU Rafts: No Supports: No Resolution: .2 Infill: 10 - 20% Notes: Due to the Black PLA filament (for eyes and nose), I needed to set the wipe tower change depth to 20mm. This ensured that I did not have any bleed between colours I chose the following colours (all from 3dprintz.co.uk): Silver * Body * Belly - Cut outs Skin * Belly White * Left eye * Right eye * Teeth Black * Left pupil * Nose * Right pupil # Custom Section <iframe src="//www.youtube.com/embed/lgcXmdbxEr8" frameborder="0" allowfullscreen></iframe> Original design: Totoro - Multi Material Creator: BZH1 Source: https://www.thingiverse.com/thing:2684224 Original license: CC BY 3.0 — https://creativecommons.org/licenses/by/3.0/ Shared unchanged from the owner’s downloaded archive. Model files are unmodified; preview resized for display. No affiliation or endorsement implied.
Printer: Use a compatible profile for your own printer
Slicer: Not specified · Material: Not specified · Nozzle: Not specified