WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

About this model

Designed by Vivalize

Parametric Pulley Belt. Original creator notes: Open this design up in Customizer to get started! I needed a belt to go along with droftarts's fantastic parametric pulley design, so I modified his code to do that. This should of course be printed with flexible filament (such as TPU or NinjaFlex). Surprisingly the belt seems to hold up pretty well in a lot of situations. I've printed it in TPU and used it to drive an electric longboard relatively well (not sure yet how long it will last though). Tooth profiles currently supported are: profile == 1 for MXL profile == 2 for 40 D.P. profile == 3 for XL profile == 4 for L profile == 5 for T2.5 profile == 6 for T5 profile == 7 for T10 profile == 8 for AT5 profile == 9 for HTD 3mm profile == 10 for HTD 5mm profile == 11 for HTD 8mm profile == 12 for GT2 2mm profile == 13 for GT2 3mm profile == 14 for GT2 5mm # Instructions Open this design in either Customizer or OpenSCAD. Input the number of teeth, which gear profile to use (profiles are listed above in the description), the thickness of the belt, and it's width. Then generate your object, download, then print it with 100% infill with flexible filament (I've only tested it with TPU so far, which seems to work decently well). Original design: Parametric Pulley Belt Creator: Vivalize Source: https://www.thingiverse.com/thing:2682637 Original license: CC BY-SA 3.0 — https://creativecommons.org/licenses/by-sa/3.0/ Shared unchanged from the owner’s downloaded archive. Model files are unmodified; preview resized for display. No affiliation or endorsement implied.

Printer: Use a compatible profile for your own printer
Slicer: Not specified · Material: Not specified · Nozzle: Not specified