WELCOME TO THE WORKSHOP

Welcome back.

Sign in to upload models and follow your prints.

About this model

Designed by MiseryBot

Wall Thickness Calibration Test Piece. Original creator notes: (sorry, video link is now dead)<i><b>THIS THING IS FAMOUS!</b> Shows up at 1:54 on this episode of Robot Hospital: http://www.youtube.com/watch?v=shpt1hD4z7Y </i> Blogged here: http://www.makerbot.com/blog/2011/06/23/wall-thickness-calibration-test-piece-by-miserybot This thing can be used to see what your skeinforge settings and bot will do for certain wall thicknesses: 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9 1.0, 1.2, 1.4, 1.6, 1.8, 2.0, 2.2 The OpenSCAD is included in case you want to try other thicknesses. The image has the "as designed" thickness in green, the measured straight wall thickness "as printed" in red (for my bot, of course), and the measured cylinder thickness in purple. My bot is set up with 0.25mm layer thickness and W/T of 2.0 for theoretical wall thickness or 0.5mm. For reference, I am using the MakerBot 0.4mm nozzle, but that really does not come into play. Slightly related to: http://www.thingiverse.com/thing:7114 # Instructions Just print and look at your output. Tweak and repeat! Original design: Wall Thickness Calibration Test Piece Creator: MiseryBot Source: https://www.thingiverse.com/thing:8859 Original license: CC BY-SA 3.0 — https://creativecommons.org/licenses/by-sa/3.0/ Shared unchanged from the owner’s downloaded archive. Model files are unmodified; preview resized for display. No affiliation or endorsement implied.

Printer: Use a compatible profile for your own printer
Slicer: Not specified · Material: Not specified · Nozzle: Not specified