STL SPLITTER IN MODEL STUDIO

STL Splitter cuts a large STL into printable pieces with adjustable seams and optional connectors. It is Homebrew Printing's integration of the MIT-licensed STL Cutter by Gluhy, not an embedded copy of the commercial SplitSTL.com service. It works in the website and Android app. Cutting runs locally on your device; a file is uploaded to Homebrew Printing only when you choose a studio-transfer button.

1. LOAD AND ORIENT
In Model Studio choose STL Splitter, then choose an STL file in the workspace or drop it onto the 3D view. Files must be 90 MB or smaller. The model should be a closed, watertight mesh. Minor duplicate/degenerate triangles and small holes may be repaired automatically; use MeshRight first for a badly damaged model. OBJ, GLB and 3MF files can be exported to STL from MeshRight before using this splitter. STL does not preserve colors.

The input is interpreted in millimeters. Inspect the model size and rotate it if a different arrangement would make better cuts. The auto-lay-flat option can turn the input before planning; check the shown dimensions after any turn.

2. SET YOUR PRINT VOLUME
Choose a printer preset or Custom and enter its build X, Y and Z dimensions. Set a bed margin so parts avoid clips and the plate edge. These are splitter fit calculations; they do not select or overwrite your Slicer Studio printer/filament presets. A plan is limited to 128 grid cells. Increase the build volume or reduce the model size if it would need more.

3. PLAN SEAMS AND CONNECTORS
Choose the connector style and dimensions, fit clearance, minimum surrounding wall and spacing. Dowel joints use separate printable pins; other styles have their own geometry and need a small physical fit test. Select Plan cuts. The plan shows cut planes and candidate connectors. Optional thick-section seam placement searches for more material around the joints. Drag seams or use the pin-edit controls when needed, then inspect every joint's location and available material. Re-plan after changing printer size, margins or global connector settings.

4. CUT AND INSPECT
Select Cut & export. The boolean cutting step runs in a separate browser worker so you can see progress and cancel it. Cancel cut stops that step. A step that exceeds three minutes stops with an explanation. Planning and interactive geometry checks may still pause on a very detailed model; smaller inputs are easier on phones.

Inspect the exploded view, piece list, connector count and fit indicators. Turn off numbering or seam chamfers if you do not want those features, then cut again. Numbering marks identify parts, normally on hidden cut faces. Orient pieces for printing applies the chosen print orientation to the exported files. A warning that a piece is too large should be resolved before printing.

5. DOWNLOAD OR TRANSFER
Download ZIP exports every part plus printable dowel stock when the chosen connector needs it. Keep the filenames and part numbers for assembly. In the card above the workspace, Part to send chooses one specific piece or dowel stock file; Open in Slicer Studio or Add support fins sends only that selected item. The ZIP remains the way to download the complete set. Studio transfers use the current cut result and its export orientation.

Choose your printer and filament in the destination studio and check the sliced toolpaths. Print a small joint/clearance test first. Digital fit checks do not establish strength, wear life, glue compatibility or safety. Assembly can need adhesives; printed dowel stock is included only when applicable.

SOURCE, LICENSE AND STORAGE
The tool and its input remain in the page's memory. Download the ZIP before refreshing or leaving; closing the browser clears this unsaved workspace. Source & licenses downloads the pinned upstream code, Homebrew adaptations and notices. Upstream: https://github.com/Gluhy/splitSTL . License: MIT, copyright 2026 Gluhy; dependencies include Three.js, Manifold, three-mesh-bvh and fflate under their own open-source licenses. Uploaded studio-transfer copies follow the website's normal private upload handling.

REPAIR BEFORE SPLITTING

For an unresolved non-watertight or intersecting input, use MeshRight to inspect and repair it, then export STL and load that repaired file here. Confirm dimensions because STL is interpreted in millimeters. Download the complete cut ZIP before leaving; the selected-part transfer sends one piece only and does not save the splitter workspace.

RELATED INSTRUCTIONS

[Model Studio tool directory](https://homebrewprinting.com/forum/topic/ai-studio-instructions) · [Slicer Studio](https://homebrewprinting.com/forum/topic/slicer-studio-instructions) · [Support Fin Studio](https://homebrewprinting.com/forum/topic/support-fin-studio-instructions) · [Community models](https://homebrewprinting.com/forum/topic/community-marketplace-instructions) · [Android app setup](https://homebrewprinting.com/forum/topic/android-app-beta) · [Report a problem](https://homebrewprinting.com/forum/topic/site-development-bug-reports)
