Overhang before and after fins
==============================

Original overhang STL plus actual server-generated support STL and separate-object 3MF.

Imported into Support Fin Studio, then generated through Supports and downloaded through Review. Keep the exported orientation and 0.20 mm layer height in your slicer. Desktop slicers can retain the 3MF’s separate model and fin objects; do not auto-arrange them independently. Slicer Studio loads this 3MF together as supported geometry and disables extra automatic supports. The supported STL is also included. Extra slicer supports are off for this practice example; inspect contact gaps and all layers before printing. The original unsupported STL is included for comparison.

UNITS AND PRINTING
All model coordinates are millimeters. These are actual generated files and geometry renders, not photographs of printed parts. Closed-mesh and slicing checks do not replace a physical print/fit test. Select your own printer, filament and temperatures. No printer-ready G-code, credentials, private project data or automatic printer commands are included.

DESIGN REFERENCE
Where included, design.json records builder dimensions; it is not a promise that the website imports JSON. generation-report.json records the actual generator result.

LICENSE
These example geometries are made available under CC0 1.0: https://creativecommons.org/publicdomain/zero/1.0/ . Photo-to-3D provenance is included with its public CC0 source. The service and generator software have their own licenses.

Instructions: https://homebrewprinting.com/forum/topic/support-fin-studio-instructions#studio-samples
