PHOTO-TO-3D CHAIR — SHAREABLE INPUT AND ACTUAL OUTPUT

The supplied STL was reconstructed from chair-reference.png using the normal Photo to 3D form at 80 mm finished size. The previous public sculpture was rendered to create this CC0 practice reference. No private photograph is included. This is inferred sculpture geometry, not measured furniture or a functional chair. Hidden sides and fine features can differ; inspect the underside and use supports as needed.

Source: https://homebrewprinting.com/community/model/e2a9432e485229e6a68ab3420bfcbff5
License: CC0 1.0 — https://creativecommons.org/publicdomain/zero/1.0/

Instructions: https://homebrewprinting.com/forum/topic/ai-photo-to-3d-instructions#studio-samples


PHOTO TO 3D — RECREATE THIS SAMPLE

1. Download chair-reference.png from this kit or the Reference image button on the sample card. This is a shareable render of the already-public CC0 chair, not a private user photograph.

2. Start a new Photo to 3D project, enter a name and upload chair-reference.png. Leave the reference brushes unpainted.

3. Set Finished size (mm) to 80. Leave Notes blank. Leave broken-part repair, neutral-gray preparation and experimental reference editing OFF.

4. Select Create 3D model. Wait for the normal server queue, open the completed project, rotate every side and download the STL.

5. The supplied STL is the actual result of those steps, with an 80 mm longest side. It is an inferred miniature sculpture: hidden geometry and exact shape can vary with the runtime/model. It is not measured furniture or a functional chair. Inspect feet, thin rails and supports in your slicer.

Verified through the ordinary browser form, server queue, worker and saved STL download on October 25, 2026. Geometry and slicing checks do not replace a physical print, fit or scan test. design.json is a settings reference, not an importable website project.
