MJOLNIR REPLICA — VERIFIED SINGLE-UPLOAD COLOR MODEL EXAMPLE This colored result was downloaded directly from the ordinary Color Model project after uploading the complete, uncolored hammer once. It was not assembled from separately painted outputs or touched up after generation. The image shows colors in this exact downloadable 3MF. REPEAT THE SAMPLE USING THE COLOR CONTROLS 1. Open Model Studio > Color model. 2. Upload mjolnir-input.stl from this kit. Units: millimeters. 3. Leave How should it look? blank. Set Body color to #B8BEC8. 4. Under Vehicle & prop features, enable Grip and set it to #67412C. Leave Handle and the other optional features unchecked for this example. 5. Select Create color model and wait for the normal generation queue. 6. Rotate the result, review every side and download the colored 3MF. The emblem is on the +Y side; rotate the preview to see it, or select Front direction +Y under Model orientation before generating. ALTERNATIVE WRITTEN REQUEST Upload the same complete STL and enter exactly: Base color #B8BEC8, grip #67412C. No added graphics. No separate part uploads or manual painting are required for either route. Both routes were tested through the real API, queue, local AI worker and downloaded 3MF. The optional color controls route was submitted from the mobile/app-sized form itself. These tests verify this sample; other models and descriptions still need visual review. FILES AND PRINTING * mjolnir-input.stl: complete uncolored input. * mjolnir-replica.3mf: actual colored user-workflow download. * mjolnir-replica.glb: actual project preview download. * mjolnir-replica.stl: geometry-only download; STL cannot retain colors. * print-part-head.stl, print-part-grip.stl, print-part-pommel.stl: individual original meshes, scaled 2.5 times and seated on Z=0. * color-request.json and generation-report.json: actual settings/results. * provenance.json: original designer, source, license and changes. Coordinates are millimeters. The complete replica is 131.875 mm tall. Choose your own printer and filaments; map the two 3MF colors to your tools. The assembled pose needs orientation/support review. Individual STLs are included for separate printing. Test socket/shaft fit on your own printer. No printer-ready G-code or automatic tool assignments are included. Mesh, color and slicing checks do not replace a physical print or fit test. Silver-gray is a color assignment, not a metallic material simulation. ATTRIBUTION AND LICENSE Original: Mjolnir / Thor hammer keychain (multipart), by lowkeyfox. https://stlw.ru/models/mjolnir-thor-hammer-keychain-multipart/ Creative Commons Attribution 4.0 International (CC BY 4.0): https://creativecommons.org/licenses/by/4.0/ The original creator retains copyright. This sample is not CC0. Changes: assembled/scaled the source parts, welded sub-micron coincident cap vertices and colored the complete upload through Model Studio. No official affiliation or endorsement is claimed. Instructions: https://homebrewprinting.com/forum/topic/ai-color-model-instructions#studio-samples