RECREATE THIS SMOOTH MESH-TO-CAD SAMPLE

1. Open Model Studio and choose Mesh to CAD.
2. Upload input.stl. Choose Millimeters.
3. Keep Merge flat faces and Recognize round surfaces ON. Keep Fit freeform surfaces and simplification OFF.
4. Use maximum surface deviation 0.05 mm and sewing tolerance 0.01 mm.
5. Select Convert to editable CAD. Wait for the queued conversion, review its report and download STEP or FreeCAD.

The actual browser/CPU queue produced these files from the measured CAD Designer 120-to-80 mm flat fan plate. It is 120 x 120 x 3 mm, with an 80 mm center opening, eight 4.5 mm fixing holes on 105 mm and 71.5 mm squares, and 4 mm rounded corners. This is a flat adapter, not a tapered duct. The preview is rendered from the converted STL.

5,040 mesh triangles became 19 CAD faces: 13 true cylindrical faces (nine hole walls and four corner arcs) and six planes. Maximum reconstructed-surface deviation is about 0.0123 mm, within the selected 0.05 mm limit. No simplification was used. Smoothing replaces inscribed polygonal arcs with fitted circles, so volume changes slightly; the report records the measured change.

STEP reopened as one valid solid and accepted an additional 2 mm diameter hole. In the native FreeCAD document, FittedProfile1 has nine diameter constraints, four radius constraints and connected outline edges. FittedPad1 has an editable extrusion depth. Changing its depth to 4 mm and a corner radius to 4.5 mm both produced valid solids in the verification. These are newly inferred features, not the original feature tree. STEP carries solid geometry; it does not carry this FreeCAD sketch/Pad history. SolidWorks was not directly tested.

For CAD editing: open model.FCStd in FreeCAD to edit the sketch constraints and Pad length, or import model.step into a STEP-capable CAD program and use its direct-edit/sketch tools. Export a fresh STL after editing. model.scad is a tessellated polyhedron with scale controls, not analytic or parametric CAD reconstruction.

Use either the source or converted STL for printing, not both. Check physical mounting sizes and clearances. No physical printer or fit test was performed. conversion.json records the input hash, fitted surfaces, bounds, volume and limitations. checksums.json verifies all companion files.
