MEASURED PART — RECREATE THIS SAMPLE 1. Start a new Measured part project. Choose Spacer / ring. 2. Set Outside diameter to 20 mm, Hole / inside diameter to 5 mm, Height to 3 mm and Fit adjustment to 0. Leave Design notes blank. 3. Select Generate and publish STL. Review and download the STL; the measured extents are 20 x 20 x 3 mm. 4. Print flat on a ring face. Check the printed bore on your actual hardware. Verified through the ordinary browser form, server queue, worker and saved STL download on October 25, 2026. Geometry and slicing checks do not replace a physical print, fit or scan test. design.json is a settings reference, not an importable website project.