20 mm spacer ring
=================

20 mm outer diameter, 5 mm bore and 3 mm height; no fit adjustment.

Made by the Measured part spacer builder. Print flat on the ring face. Measure a small fit test before using a spacer in a working assembly.

UNITS AND PRINTING
All model coordinates are millimeters. These are actual generated files and geometry renders, not photographs of printed parts. Closed-mesh and slicing checks do not replace a physical print/fit test. Select your own printer, filament and temperatures. No printer-ready G-code, credentials, private project data or automatic printer commands are included.

DESIGN REFERENCE
Where included, design.json records builder dimensions; it is not a promise that the website imports JSON. generation-report.json records the actual generator result.

LICENSE
These example geometries are made available under CC0 1.0: https://creativecommons.org/publicdomain/zero/1.0/ . Photo-to-3D provenance is included with its public CC0 source. The service and generator software have their own licenses.

Instructions: https://homebrewprinting.com/forum/topic/ai-measured-part-instructions#studio-samples


MEASURED PART — RECREATE THIS SAMPLE

1. Start a new Measured part project. Choose Spacer / ring.

2. Set Outside diameter to 20 mm, Hole / inside diameter to 5 mm, Height to 3 mm and Fit adjustment to 0. Leave Design notes blank.

3. Select Generate and publish STL. Review and download the STL; the measured extents are 20 x 20 x 3 mm.

4. Print flat on a ring face. Check the printed bore on your actual hardware.

Verified through the ordinary browser form, server queue, worker and saved STL download on October 25, 2026. Geometry and slicing checks do not replace a physical print, fit or scan test. design.json is a settings reference, not an importable website project.
