Open magnet-pocket tag ====================== 54 × 30 × 5 mm tag with a 10 mm magnet pocket and 0.3 mm overall clearance. Built by Sign & keychain. Open circular pocket for a nominal 10 × 3 mm magnet, with 0.3 mm added to diameter and depth. Print pocket-up and fit/retain the magnet after printing. This is an open pocket, not an enclosed insert or snap fit. The kit contains no magnet. UNITS AND PRINTING All model coordinates are millimeters. These are actual generated files and geometry renders, not photographs of printed parts. Closed-mesh and slicing checks do not replace a physical print/fit test. Select your own printer, filament and temperatures. No printer-ready G-code, credentials, private project data or automatic printer commands are included. DESIGN REFERENCE Where included, design.json records builder dimensions; it is not a promise that the website imports JSON. generation-report.json records the actual generator result. LICENSE These example geometries are made available under CC0 1.0: https://creativecommons.org/publicdomain/zero/1.0/ . Photo-to-3D provenance is included with its public CC0 source. The service and generator software have their own licenses. Instructions: https://homebrewprinting.com/forum/topic/sign-keychain-builder-instructions#studio-samples SIGN & KEYCHAIN — RECREATE THIS SAMPLE 1. Start a new Sign & keychain project. Choose Rounded rectangle, Width 54, Height 30, Base thickness 5 and Corner radius 4 mm. Leave Raised detail height 0.8, Border width 0, and clear Words. 2. Choose One keyring hole after setting the outside width. Confirm X -21, Y 0 and Diameter 4 mm. Leave symbols, pictures and QR off. 3. Expand Hardware pockets & fasteners and choose + Magnet. Select Open pocket and Round. Set Diameter 10, Hardware thickness 3, Fit allowance 0.3, X 0, Y 0 and Rotation 0 degrees. Do not use Fit thickness: the sample is already 5 mm thick. 4. Select Update 3D preview. Confirm a 10.3 mm diameter, 3.3 mm deep recess with 1.7 mm of floor remaining. Check the review checkbox, then Generate sign / keychain STL. 5. Print pocket-up. Insert and secure your own nominal 10 x 3 mm magnet afterward. This is an open recess, not a snap fit or enclosed insert. Verified through the ordinary browser form, server queue, worker and saved STL download on October 25, 2026. Geometry and slicing checks do not replace a physical print, fit or scan test. design.json is a settings reference, not an importable website project.