CAD DESIGNER — RECREATE THIS SAMPLE 1. Start a new CAD Designer project and enter a project name. 2. Paste this complete description: Make a 120 x 120 x 3 mm rounded plate with XY corner radius 4 mm and center X=0, Y=0, Z=1.5. Cut a centered 80 mm diameter through airflow hole. Cut four 4.5 mm through holes in a 105 x 105 mm centered mounting pattern and four 4.5 mm through holes in a 71.5 x 71.5 mm centered mounting pattern. Both mounting patterns have center X=0, Y=0. One connected flat plate, bottom Z=0. 3. Select Analyze description. Review four features: one added rounded plate, one through airflow opening and two four-hole patterns. Check all sizes against the description; AI planning can vary. Expand a feature to correct a numerical value if necessary. All X/Y centers are 0; the plate center Z is 1.5 mm. 4. Select Update 3D preview. Confirm 120 x 120 x 3 mm and nine through openings (one airflow opening plus eight screw holes). Confirm the review checkbox, then Generate reviewed CAD STL. 5. Reopen the saved project and download its STL. Print the plate flat. This is a plate, not a tapered duct. Measure your actual fans before use. Verified through the ordinary browser form, server queue, worker and saved STL download on October 25, 2026. Geometry and slicing checks do not replace a physical print, fit or scan test. design.json is a settings reference, not an importable website project. Sample mesh refreshed October 27, 2026 from the included reviewed feature specification using the current CAD Designer builder. The STL has 5,104 triangles, with the nominal dimensions and all nine openings described above. The preview renders this refreshed STL. This is a digital geometry check; no physical print or fit test was performed.