120 to 80 mm fan adapter ======================== 120 × 120 × 3 mm plate, 80 mm opening, 4.5 mm holes on 105 and 71.5 mm mounting squares. Compiled by CAD Designer from the included feature specification. Print flat. Check both fan mounting patterns before use. This is a flat adapter plate, not a tapered duct. UNITS AND PRINTING All model coordinates are millimeters. These are actual generated files and geometry renders, not photographs of printed parts. Closed-mesh and slicing checks do not replace a physical print/fit test. Select your own printer, filament and temperatures. No printer-ready G-code, credentials, private project data or automatic printer commands are included. DESIGN REFERENCE Where included, design.json records builder dimensions; it is not a promise that the website imports JSON. generation-report.json records the actual generator result. LICENSE These example geometries are made available under CC0 1.0: https://creativecommons.org/publicdomain/zero/1.0/ . Photo-to-3D provenance is included with its public CC0 source. The service and generator software have their own licenses. Instructions: https://homebrewprinting.com/forum/topic/ai-cad-designer-instructions#studio-samples CAD DESIGNER — RECREATE THIS SAMPLE 1. Start a new CAD Designer project and enter a project name. 2. Paste this complete description: Make a 120 x 120 x 3 mm rounded plate with XY corner radius 4 mm and center X=0, Y=0, Z=1.5. Cut a centered 80 mm diameter through airflow hole. Cut four 4.5 mm through holes in a 105 x 105 mm centered mounting pattern and four 4.5 mm through holes in a 71.5 x 71.5 mm centered mounting pattern. Both mounting patterns have center X=0, Y=0. One connected flat plate, bottom Z=0. 3. Select Analyze description. Review four features: one added rounded plate, one through airflow opening and two four-hole patterns. Check all sizes against the description; AI planning can vary. Expand a feature to correct a numerical value if necessary. All X/Y centers are 0; the plate center Z is 1.5 mm. 4. Select Update 3D preview. Confirm 120 x 120 x 3 mm and nine through openings (one airflow opening plus eight screw holes). Confirm the review checkbox, then Generate reviewed CAD STL. 5. Reopen the saved project and download its STL. Print the plate flat. This is a plate, not a tapered duct. Measure your actual fans before use. Verified through the ordinary browser form, server queue, worker and saved STL download on October 25, 2026. Geometry and slicing checks do not replace a physical print, fit or scan test. design.json is a settings reference, not an importable website project. Sample mesh refreshed October 27, 2026 from the included reviewed feature specification using the current CAD Designer builder. The STL has 5,104 triangles, with the nominal dimensions and all nine openings described above. The preview renders this refreshed STL. This is a digital geometry check; no physical print or fit test was performed.