Geometry colors and filament assignment example

Two 20 x 20 x 2 mm tiles, separated 2 mm in combined files (42 x 20 mm footprint). Separate STLs each start at the origin. Flat on bed, no supports. Generic 3MF contains display materials only, no printer settings. Software-slicing geometry does not certify multicolor output.

All model dimensions are in millimeters. Inspect orientation, size, and preview before printing.
Original files; geometry was checked where supplied. No physical print test was performed.
No ready-to-print G-code or printer profile is included.
See the matching Homebrew Printing forum post for the full workflow.
