Unknown-command diagnosis worksheet
Release 2026-10-24-v1

No machine-ready G-code is included. Copy only a small redacted excerpt from your own downloaded file into the report. Record the exact command, firmware/version, printer and slicer profile, whether the command is in start/end code or generated paths, and the configured feature support. Do not delete unfamiliar lines in bulk or send commands as a diagnostic experiment during a print. Re-slice with a corrected profile and inspect the resulting file.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
