Thread connections and insert-pocket trials
Release 2026-10-24-v1

The five blind pockets run left to right at nominal diameters 3.8, 4.0, 4.2, 4.4 and 4.6 mm, 6 mm deep above a 2 mm floor. These are example trials, NOT recommended holes for all inserts. Choose your exact insert first and change the SCAD diameters, depth and surrounding material to its manufacturer drawing. Keep tool and screw access clear. Cool the installed insert before a gentle fit check; do not infer a pull-out rating from this coupon.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
