Support-interface comparison
Release 2026-10-24-v1

The coupon has a 24 mm unsupported span beneath its roof. Slice it with supports for the support-interface trial. Compare your normal same-material supports with an intentionally configured second-material interface. Keep orientation and main material fixed. Select real tools/materials, verify the interface and bulk-support assignments in Preview, and use printer-specific purge/prime settings. No universal zero-gap or temperature preset is supplied.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
