Split-model alignment practice
Release 2026-10-24-v1

Print the left and right halves and TWO copies of the pin. Each half is 20 x 20 x 12 mm with two horizontal blind holes, nominal 3.4 mm diameter and 6 mm depth, centers Y5/Y15 and Z6. Pins are nominal 3 mm diameter x 10 mm long. Place the left half's X20 face against the right half's X0 face. Nominal diametral clearance is 0.4 mm; physical fit must be tested. Horizontal hole ceilings may print imperfectly. In OpenSCAD choose part="left", "right" or "pin" before exporting each solid. Dry-fit gently before choosing any adhesive. Not a load-rated joint.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
