Snap-fit planning and flexure trial
Release 2026-10-24-v1

This is a beam-thickness comparison coupon, NOT a complete snap-fit enclosure. Three 3 mm-wide beams attach to an 8 mm root. From low Y to high Y their nominal thicknesses are 1.2, 1.6 and 2 mm. End tabs make identification/handling easier. Print flat as modeled. Compare only gentle small deflections; edges or broken fragments can be sharp. This does not establish allowable strain, retention force or fatigue life. Develop a separate mating latch and clearance trial for your real lid.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
