Nozzle comparison tile
Release 2026-10-24-v1

Tile dimensions 60 x 35 x 8 mm. Four thin bars run along X, from low Y to high Y: 0.4, 0.6, 0.8, 1.2 mm nominal width. Four posts increase in diameter along X: 1, 1.5, 2, 2.5 mm. Some features intentionally challenge larger extrusion widths; their omission or widening is a comparison result to inspect, not proof of a broken slicer. Use correct nozzle profiles and compare matching surface thickness, not blindly identical wall counts. No speed or strength result is pre-filled.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
