Illustrative 120-to-80 mm fan transition
Release 2026-10-24-v1

Default dimensions: 128 mm lower square flange; 88 mm upper flange; 30 mm overall height; 4 mm flange thickness; nominal lower/upper bores 110/72 mm; bolt-hole spacing 105/71.5 mm; bolt diameter 4.5 mm. Measure YOUR fans, screw heads and installed clearance first. Nominal fan size does not establish mounting compatibility. Edit the SCAD parameters, render, and inspect the airway and fasteners. No airflow, noise, thermal, seal, or strength rating is claimed. Material suitability depends on location and temperature.

USING THIS KIT
1. Read the matching forum post and this README.
2. Extract the ZIP. Edit any SCAD source in OpenSCAD and render before exporting.
3. Import STL in your slicer using millimeters and place the bottom on the plate.
4. Select YOUR printer, nozzle, filament and process; inspect supports and preview.
5. Print a small trial and record actual results in the worksheet.

VALIDATION
Included meshes have been rendered and checked for a closed, consistently wound single solid and stated overall dimensions. This is not a physical print, fit, airflow, electrical, or strength validation. No printer-ready G-code or vendor profiles are included. Blank worksheets contain no claimed results.

LICENSE
Original Homebrew Printing geometry, source and blank worksheets in this kit are dedicated under CC0 1.0. External documentation and hardware designs are not included or relicensed.
